The Orientation Sub orients the PowerTrac® to prevent tractor wheel hold up in the pocket of a side pocket mandrel (SPM). The sub, attached at the bottom of the tractor assembly, has a spring-loaded finger adjusted at a 45-degree angle between the tractor wheels. The finger locates in the orientation groove of the SPM and orients the tractor wheels.
Service Name | Orientation | Orientation Sub 448 |
Tool body outer diameter | 3.71 inches / 94.2mm | 4.480 inches / 113.8mm |
Length | 1.08 ft./0.33m | 1.14 ft./0.45m |
Minimum restriction ID | 3.84 inches / 97.5mm | 4.61 inches / 117.1 mm |
Pressure rating | 20,000 psi / | 20,000 psi / |
Temperature | 177 °C/350 °F | 177 °C / |
Electrical feed through | Yes | Yes |