Spec Sheet:

Precision Mechanical Applications



Clean and access your well

The PrecisionSuction removes debris by creating a suction effect in the wellbore thereby agitating and extracting the target debris for collection in reservoir chambers. It is suitable for loose debris and complex completion profiles. Wellbore fluids are filtered and circulated back into the borehole.


  • Removes, collects, retains and transports debris from wellbore completions e.g. fluid isolation valves and top of retrievable plugs
  • Unconsolidated debris types; scale, proppants sand, mud and silt

Key Features

  • E-Line conveyed, powered device
  • Can be run standalone
  • Well fluids filtered out optimising reservoir chamber collection volume
  • Reservoir chamber quantity can be optimised depending on available rig up height and well trajectory
  • Nozzles can be configured depending on completion profile and debris type


  • Cost effective option for cleaning out loose, unconsolidated debris especially from latching profiles
  • Precise and low-risk wellbore cleanout service; no mechanical interaction with completion components
  • Suction allows collection of debris on the side of well trajectory (e.g. SPM)
  • Light on logistics, footprint, personnel and time

PrecisionSuction Specifications

Service Name

PrecisionSuction 350

Tool body outer diameter 13.5 in (88.9 mm)
Resevoir chamber OD3.5 in (88.9 mm)
Capacity per resevoir chamber1.11 gal (4.2 l)
Length single resevoir chamber3.9 ft (1.19 m)
"Standard" configuration capacity 25.55 gal (21.0 l)
"Standard" configuration resevoir chambers length 223.4 ft (7.1 m)
"Standard" configuration total length35.1 ft (10.7 m)
Pressure rating20,000 psi (1,379 bar)
Temperature rating302 °F (150 °C)
Deviations0° (vertical) - 50°
Operational RPM≤ 4,000 rpm
Tensile strength13,228 lbs (6,000 kg)

1 Tool OD Only
Standard configuration for PrecisionSuction is 5 reservoirs plus 1 filter chamber but dependent on rig up height.


Talk to our experts

Stay up to date