Precision Manipulation
PRIME Stroker & Extended Range Hydraulic Shifting Tool
The PRIME Stroker is the latest component of Altus Intervention’s new PRIME Technology Platform. Designed for completion manipulation, it incorporates a high degree of instrumentation and multiple sensors providing tool and task parameter intelligence and control along with high-speed telemetry comms for real-time tool task management. The stroker anchors in the casing/tubing and applies bi-directional axial force to the manipulation tool to install, retrieve and manipulate completion
components. It is run standalone in vertical wells or in combination with the PowerTrac® tractor for conveyance in deviated wells.
Built on the PRIME 2.5in OD tool size architecture, the PRIME Stroker comes with an associated Extended Range Hydraulic Shifting Tool (XR-HST). This enables passage of the toolstring through small wellbore restrictions when the anchor and shifting tool are retracted, while being able to anchor and engage in larger tubing, sleeve or valve profile dimensions when activated.
FEATURES
- 30k lbs pull and push capability
- PRIME XR-HST Shifting dog expansion to 5.3 inch
- Interface to hydraulic activated 3rd party shifting tool
- High degree of instrumentation and multiple sensors providing tool and task parameter intelligence
- Real-time monitoring and control of applied force and positioning
- Unlimited number of strokes cycles, with self-locking actuator
- Bi-directional stroke with resolution of +/- 0.04 inches (1 mm)
- Independent stroke and anchor control, with anchor force measurement
- Progressive anchoring force proportional to magnitude of push/pull on completion component
- Electrical feed through on stroker and shifting tool allowing powered tools and/or sensors to be run below
BENEFITS
- Highly precise shifting capability due to 1 mm stroke resolution and instrumentation
- Superior manoeuvrability due to independent anchor control
- Multiple stroke actuation per run in the well
- High operational efficiency due to electrical feed enabling additional tool/sensor to be run below Stroker and Shifting tool
- Pad anchoring device provides even and reduced pressure on tubing
| PRIME STROKER 212 | SPECIFICATIONS |
| Tool OD | 2.50 in / 63.5 mm |
| Tool Length | 23.19 ft / 7.10 m |
| Anchor OD | 2.5 in / 63.5 mm Kit 1: 3.6 in / 91.4 mm Kit 2: 5.0 in / 127.0 mm |
| Minimum setting ID | 2.625 in / 66.675 mm Kit 1: 3.725 in / 94.615 mm Kit 2: 5.125 in / 130.175 mm |
| Maximum setting ID | 4.1 in / 104.140 mm Kit 1: 5.19 in / 131.826 mm Kit 2: 6.59 in / 167.386 mm |
| Maximum bi-directional force | 30,000 lbs / 13.6 T |
| Stroke length | 20 in / 508 mm |
| Stroke position resolution | +/- 0.04 in / +/-1 mm |
| Electrical feed-through | Yes |
| Pressure rating | 15,000 psi (1034 Bar) |
| Temperature rating | 177°C / 350°F |
| PRIME XR-HST | SPECIFICATIONS |
| Tool OD | 2.50 in / 63.5 mm |
| Tool length | 10.99 ft / 3.35 m |
| Maximum shifting dog extension OD | 5.30 in / 134.62 mm |
| No. of shifting dogs (up/down) | 3/3 |
| Electrical feed-through | Yes |
| Bi-directional shifting | Yes |
| Pressure rating | 15,000 psi (1034 Bar) |
| Temperature rating | 177°C / 350°F |
- Instrumented, user controlled device
- Interface to hydraulic activated 3rd party shifting tools