High shot density perforation uses the best-performing charges together with optimal phasing patterns in a high shot density to produce the ideal perforations for the completion.
Selective perforation tools are designed to allow multiple perforations in one run.
Allows the direction in which perforating charges are fired to be pre-selected, ensuring perforation stability.
Allows the direction in which punching charges are fired to be pre-selected, ensuring limited entry without damage to outside liner.
Deep penetrating shaped charges offer excellent penetration when compared to conventional shaped charges while maintaining excellent hole diameter.
Big Hole Shaped Charges are designed for softer formations that exhibit a higher degree of permeability and natural fractures.
Allows plug setting and perforating in one single run in the well.
We provide a wide range of explosive and non-explosive setting tools, enabling us to set almost any plug available on the market.
We are an independent provider of explosive services and use a number of trusted suppliers. Spec Sheets are available on request for these tools and services.
A variety of tubing cutters are available in a number of sizes to cut most drill pipes and heavy weight drill pipes.
Tubing punchers are used to punch holes in the tubing wall without damaging the casing behind, in order to re-establish circulation. We also offer a wide range of setting tools, enabling us to set almost any plug available on the market.
Small ID cutters to be run inside coiled tubing. A variety of Explosive and non-explosive coiled tubing cutters are available
We provide a wide range of explosive and non-explosive setting tools, enabling us to set almost any plug available on the market.
A tool used to accurately assess where the stuck point of the pipe is and maximise the pipe recovered.
We offer a range of tools to perform scale and corrosion removal operations.
Jet cutters can cleanly cut coiled tubing, casing, drill pipe, packer mandrels and production tubing to make fishing, well intervention and plug and abandonment (P&A) jobs significantly more efficient.
The Split Shot Cutter uses a linear shaped charge to split tubing and casing collars vertically. Split Shot Cutters are available in various sizes, lengths and temperature ratings and can be used for most tubing and casing sizes.
The explosion produces much the same effect as an intense hammer blow and allows the joint to be unscrewed at the dedicated connection.
A variety of charges are available including the Dynaslot which is designed specifically for plug and abandonment cement squeeze operations. The overlapping charge system provides a complete 360-degree access to the area behind the tubing or casing.
We are an independent provider of explosive services and use a number of trusted suppliers. Spec Sheets are available on request for these tools and services.